I ordered from a warehouse in the Russian Federation, so I received everything quickly enough. Received the spools of Creozone plastic ordered for the promotion.
OEM supplier and manufacturer of plastic I’ve been wanting to make a shadow theater for a long time. It’s just that he didn’t seal it on the glass, but if I smeared it with something, then things went more successfully. Inside there is a bag of silica gel. And if PLA can be taken for a try (And the plastic is not bad, but somewhat more expensive than FDplast), then any exotic type in a large lot with PETG / WOOD / NYLON plastic and so on turns out to be quite profitable. Pen for something.
Creoson PETG Specs:
The photo shows a comparison of nylon and PET packaging Photo of a one-kilogram coil from a PETG lot. Tolerance: ±0.03mm
One of the features of white PETG is translucency. PETG: 230-260℃ (446-500℉)
A couple of tips – it’s better to print with opaque plastic (black PETG is more suitable for this) and use a flashlight without a divergent lens (otherwise the contours of the figures will be fuzzy).
A simple vase on a scale for a dollhouse. Diameter: 1.75mm Print temperatures: Greetings to everyone interested in 3D printing and not only.
Technology Features: Zero-bubble
There is also black PET. Since I bought PETG on one of the promotions, and the seller gave an additional good discount on the code word, I indicate item 18. Although you can write something like creozone sss 1.1 and so on.
Under the microscope. An impromptu theater can be made from any large box, A4 paper and a flashlight. Otherwise, do not tear off))))
There is an insert, again with coupons)))
It’s nice that the weight is just over 1 kg. A few print examples. And share my impressions of PETG printing. As far as PETG is concerned, it is now possible to buy stocks at a similar price from other manufacturers, but nylon and other exotic stocks remain profitable to buy. Preheat 70.90°C
A sticker with the type of plastic, weight and packing date.
I would like to draw your attention to the fact https://jiji.com.gh/cars/volkswagen-passat-2009 that successful printing with PET will require not only heating, but also something to increase adhesion (adhesive tape, stickers, etc.). Personal impression: temperature 245°C and table 65°C.
Printed figurines that can be attached to sticks. For comparison, below is a segment after the extruder (pulled out of the Bowden tube, a notch from the gear is visible).
A box-case for something
The enlarged retract removed the extra cobweb from the part. It is necessary to increase the retract. The Creozone store periodically has promotions with a decrease in the price of plastic.
PETG once again proved to be on the good side – the layers are even.
PETG plastic for 3D printer
Pay attention – there is excessive hairiness. I bought as standard – one of the shares. The diameter of the different segments is 1.75 mm.
Suitable for flowers for dolls) If you want to buy this plastic, wait for a reasonable price (currently about $30 for exotic, about $23 for regular PLA/ABS). Moulds- cuttings for dough Somewhat reminiscent of a PLA coil. Other colors can be ordered from a warehouse from China (long enough). Print Speed: 30-60 mm/sec.
The spool of plastic is packed in a hard vacuum bag. What came of it, you can see under the cut. If you make the layer less than 0.3 mm, then it will be problematic to detach the finished part))) Two segments from the coil – the plastic is smooth without thickening, without bubbles and without foreign inclusions. So far)))) Weight: 1 kg (2.20 lbs) Plastic there with a margin)))) Creozone packaging is standard.
The bottom also turned out even and smooth.
The spool itself is different in shape from the nylon spool. Something like this I ordered in October – in addition to the promotional price, the seller additionally made a few bucks a discount, I got it very well.
I liked the PET — the layers lay down well, with heating the adhesion is excellent. Even without any code words, the seller will make a discount.
There are no drips of plastic, hair, etc. inside. The vase turned out to be nothing
Photograph of the coils in the package. The plastic turned out to be durable, more resistant than PLA. Although of course you need to check with a micrometer along the entire length. Plastic turned out to be cheaper than Russian counterparts, the quality is not bad.
We need to add a screen and light. Place an order and don’t pay. Printed on adhesive sticker, first layer 0.3mm, then standard.