التصنيفات
ads

TinHiFi T3 Plus dynamic headphones – bright and emotional

The choice for my first in-ear wired headphones from TFZ was not accidental, because, firstly, I did not hear any flaws or any underplaying in the sound, but the presentation was very massive and not overloaded; secondly, the One Love Edition 2021 model clearly conveys the upper range in conjunction with the Shanling M3X (review here); thirdly, it was in the upper range that the model in the review had less details (during warm-up, after – the upper frequencies played out well and cleanly) than I was used to, but in general, this section of the frequency response was played well (chaotically – yes, but not quite as bad as it gets). High frequencies, as mentioned above, are not
The strong point of the headphones, they sound good (better in combination with bass). The front side in the black version looks advantageous, expensive, which gives the impression that the headphones will transmit sound of better quality than you think in advance. The cable is prone to twisting, soft and looks a little simple, ridiculous, but, according to its characteristics, very worthy against the background of the presentation of the headphones: cable made of PVC with insulation, cross-sectional diameter 2.8 mm (40/0.05 oxygen-free copper 200D Kevlar) * 4-core black PU headphone cord: The T3 Plus model is suitable for those who like a dimmed sound. The case is one-piece without connecting lines. The headphones do not go into excessive monitoring and micro-contrast, they separate the plan well in compositions and accurately work out attacks and decays (they are quite biting and long, you can hear the beginning and end). The bad thing about headphones is only the price, but for the price this is a very good option! It can be seen that the company has put a lot of effort into the form and format of the product presentation. After 10 hours, the sound took on its shape and did not feel any further changes. Purchase confirmation: 1. The slogan of TinHiFi can be briefly formulated as: a worthy product for
inexpensive. In headphones, the sound balance and its shape are more suitable for all genres, except for the classical one, that is, they present it not as brightly as others, but still at an acceptable level. The shape of the shells is very beautiful, presentable, one might say, to look at and hold them in your hands. The middle also did not raise questions: the voices and the transfer of emotions are not exaggerated, natural, as it is in the recording, without drops, and also the voices are like from a bucket. The standard package is practically, with the exception of foam ear pads and a spacious carrying case.
I especially liked the fabric case. After such a test, it became clear that the DAC has a powerful feed and TinHiFi do not contradict it, but play in unison. Perhaps it (the range) will sound more interesting with a different, less powerful and simple amplifier. Of the models that I previously reviewed for a comparable price, the data is the golden mean, since there are no distortions and questions regarding the transfer of the scene, playing drums and the entire frequency range. On the review – TinHiFi T3 Plus. Headphones represent a new direction in sound for TinHiFi. Remove frequency response: As I said above, I started listening to these headphones with a new source for myself, the Yaqin X8 DAC, and not with a player. The seller claims that the T3 Plus is a completely new round of headphones for the company, and not a continuation of the previous model. Headphones are packed in a beautiful square white box, on the back of which technical specifications are indicated in different languages. I coincided with a change in source with new headphones with an enlarged portable case (“accidents are not accidental”).
All ear pads, cable and headphones are shown below.
The TinHiFi T3 Plus uses a single 10mm dynamic driver made of full size liquid crystal polymer (LCP). From the product page, this slogan is confirmed by the words of the manufacturer and the trepidation of the approach to the transfer of music.
The wire from the kit is similar to the one from the T5 model kit.
The diameter of the sound guide is 6 mm, the extension of the sound guide is 5 mm, the compensation hole is on top of the shell. The earpiece is shown from all sides below: It turns out that foam ear pads are not a gift, but part of the package, since the product page indicates that these foam ear pads are included (but, of course, it all depends on the seller. The headphones warmed up for about 10 hours. It’s hard to guarantee): As part of the audition, an overloaded composition Gojira — L’enfant sauvage (L’Enfant Sauvage (Special Edition)) and TinHiFi T3 Plus coped with it with a bang: clearly, without porridge and with separation of instruments. Only the headphones themselves could hardly be placed in similar accessories from other companies, and the DAC also fit into this one.
The headphone fit is shown below: While warming up, I compared the model with the TFZ One Love Edition 2021 (review here) to assess how much the change in source affected my perception of the sound and how much of this change is explained by TinHiFi T3 Plus. The headphones really liked the playing of the lower part of the range: the bass had a shape (beginning, top and end), the drums were sharp and long. The comparison was based on a similar transmission of sound material, but only with the correction that the V90s were more bassy and less accurate, they benefited from a simple transfer of bass and mids.
Composition of the package: headphones, four-wire cable, six pairs of silicone ear cushions with thick and narrow cores, plus three a pair of foam, a spacious cloth cover, documentation. As I listened to music through TinHiFi T3 Plus, TRN V90 constantly popped up in my memory (review here). Joan Baez

TinHiFi T3 Plus dynamic headphones – bright and emotional

The goods and accessories are hidden under a white cover, on the opposite side of which documents and text information on the headphones are beautifully packaged:

التصنيفات
ads

A set of 0.5W zener diodes, 30…

The other day I came across the fact that I needed 12V zener diodes, and they were not available. Next, I decided to test the zener diodes with this tester: However, in local stores, the quality will certainly not be better. Is it good.

Includes zener diodes for 2.0, 2.2, 2.4, 2.7, 3.0, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.2, 6.8, 7.5, 8.2, 9.1, 10, 11.12, 13, 15 , 16, 18, 20, 22, 24, 27, 30, 39V, 10 pieces of each https://jiji.com.gh/169-handbags/leather denomination. Each denomination comes in the form of a ribbon trim, the denomination is signed on the ribbon. The results are mixed. UPD: according to the datasheet on the BZX55, a link to which comrade ksiman gave – the zener diodes are quite acceptable, in any case, those few denominations that I briefly By the way, the zener diodes themselves, of course, are also marked, but the marking is completely disgusting, although it’s possible that I’m digging and it’s just that my eyesight is poor.

A set of 0.5W zener diodes, 30 denominations, 10 pieces each. I decided to order a set so as not to look in case of something. If for a more or less serious repair or device, then I know damn well. unless you take a few lots and then select, or buy more responsible denominations from more trusted sellers. I have modified it, it gives out 31V and 5mA – and this is important, because zener diodes have a rather strong dependence of the stabilization voltage on the current. The results of the check in the table. In general, if you need something undemanding, then it’s okay, the money is ridiculous.
I chose the delivery set without a box, in a package. Larger

التصنيفات
ads

Cordless wrench with 20V/4Ah battery and brushless motor

All is well with ventilation: Forward rotation – switching between the first and second speeds of rotation (and, accordingly, the strength of the impulse).
In addition, the rear side of the wrench is also protected with rubber to avoid damage to the body and internals when falling. I would like to emphasize that a “brushless” (brushless) motor (and, in a correct way, “valve”) is installed in the wrench. — fastening for unloading (or belt),
The gearbox casing is made of metal: The absence of a commutator-brush assembly (the one that sparks, makes noise, reduces efficiency and needs regular maintenance and replacement) gives the following advantages: Reverse rotation – switching between continuous unscrewing mode and stop rotation mode after unscrewing the nut.
The bag is good and durable, I like this kind of packaging of tools more than bulky plastic cases: ¤ cam chuck with an adapter and a key, The bag:
The Chinese combined a friction ring in the fitting, which ensures a quick change of heads and also added a hole, which allows the installation of interchangeable cartridges (included in the kit): Nutdriver: In this mode, the wrench, after unscrewing the nut, performs a few more turns of the head and, on its own, stops the rotation, thereby leaving the nut “baited” on the bolt or stud. It is very convenient and useful so as not to accidentally lose the nut (which can pop out of the head and fall into no one knows where) and carefully unscrew it by hand. – Higher efficiency indicators due to the absence of losses on the sliding contact of the brushes and the collector, respectively, more power and less consumption. — They can work in aggressive and explosive environments, with high humidity. – belt, Glows just below the place of work: The tool is made very well, the plastic molding is good, the handle is finished with rubber anti-slip inserts on both sides: Hence the name "valve" – ​​controlled by valves (electronic keys = transistors).
— wrench, In English, "Brushless Direct Current motor" or https://jiji.co.ke/cars/bmw-535i BLDC motor (literally "brushless DC motor"). Component size:

Not so long ago I did a review on a Chinese cordless grinder, which has been working for me for the third month and, unexpectedly, turned out to be one of the most useful tools, despite the non-standard size of cutting discs for us (which I , nevertheless, I found it on sale in the OBI construction market).
In essence, this is a familiar DC motor turned inside out. The principle of operation of a brushless motor (right) in comparison with a standard brushed motor (left): However, of course, the use of the tool is much wider, the impulse motor of the apparatus allows you to unscrew even very tightly tightened, soured and rusted nuts. — battery 20V/4Ah, Modes: So let’s get started. – They carry a large load in terms of moment.
There are six indicator windows in total: three in the center in a column, it is clear that they show the remaining battery charge.

Three-position switch for the direction of rotation with a middle position that blocks the pull of the trigger:
Existing variants of this element: It has a built-in charge indicator: — additional interchangeable attachments that allow you to make a screwdriver or a drill out of a wrench: Equally powerful in any direction of rotation.
Place for installing a complete mount for unloading or belt, battery seat , fall protection: – bag .
Inside: Comparison of the dimensions of a brushless (left) and conventional brushed DC motor:
¤ hex shank chuck (drills and bits), The magnets move to the rotor, and the windings move to the stator.
Source: _http://www.toolgir.ru/tehnologii-instrumenta-milwaukee-fuel/
Complete set : The literate name of engines of this type in Russian is "valve engine". The seller has several tool kits, the price depends on the type of tool.
There is a platform with a button and indicators above the battery: You can order from a simple "naked carcass" (without everything) to a complete set with a bag, two batteries and additional accessories.
Under it there is a backlight LED, with a turn-off delay (the backlight works for another 5 seconds after the head stops rotating): Continuing the theme of a cordless tool from the Middle Kingdom, this time a powerful brushless wrench with a large battery. —Less noise, less heat, and
virtually no radio interference.
It’s funny that on the tool the indicator has three divisions indicating the battery charge, and on the battery itself there are four windows 🙂
Characteristics: — A simpler and more compact engine design (at least shorter by the thickness of the manifold assembly). — A wide range of rotation speed adjustment (if desired, you can literally “turn” it into a stepper motor). — charger, And the other two dots indicate the mode is on, it is switched by the button. Although not quite correct, but a common and already established option is the “brushless motor” (you have to use it), sometimes the “brushless motor” is used. In the household, such a tool is usually most in demand during a seasonal change of wheels, when winter comes unexpectedly, prices in tire shops skyrocket (even for a simple change of shoes, without rubber overturning), and you can easily stand in line for three or four hours.
The inclusion of this mode is indicated by a dot (only works in unscrewing mode): – The life of the motor is ideally limited only by the life of the bearings. The brush-collector assembly responsible for switching the windings is replaced by electronics – one or more sensors are installed on the rotor that track its position (usually Hall sensors), and the controller, based on this data, applies voltage to the winding that is currently needed, creating a change in fields and rotation .

Cordless wrench with 20V/4Ah battery and brushless motor

Now I suggest you read about the wrench. < /p>
An interesting landing fitting, which has the most common size in our country – 1/2":

التصنيفات
ads

Li-Ning Pioneer winter boots AGCN125

It seems that against the background of the spread of modern heaters such as Thinsulate, this is the last century. That’s all. Boots do not press and tightly wrap around the legs. Snow of any degree of compaction is not a problem for her. But in the area of ​​\u200b\u200bthe fingers there was immediately tangible discomfort and pressure.
On the side surfaces, the leatherette is smooth, with decorative stitching. But consumer qualities for a short period of wear turned out to be very good.
There were such plastic locks hanging on the lacing, I don’t know why.
However, no one promised water protection. I was pleasantly surprised by the tenacity of the sole.
We consider from all sides.
Surprisingly, Merrell Polarand Rove and Columbia Firecamp Fleece, despite having proprietary technologies, fared worse in this regard.
The laces are variegated, black with white dots.
But judging by the photo from the side, they don’t look so bad. Here there is no such thing. But until now, the front is somehow uncomfortable, harsh or something. The boots weigh 390 g each. The size is the same.
Inside the boot there is a lining of fibrous nonwoven
material. It’s not very comfortable anymore. On the back of the tongue there is a regular label with the size designation. The boots are insulated with faux fur from the inside.
From the reverse side, the base is made of foamed rubber. Foot length 29.5 mm. This is how they look on their feet. Underneath are glued pads of even tougher rubber. On the very tip of the sock crawls the sole, protecting it. The product was provided for writing a review by the store. To date, I’ve worn the boots for two weeks, mostly with medium thickness thermal socks. The laces of the boots are of sufficient length. Let’s sum up the total. Slides only on bare ice.
There are issues with sizing.
The outer half of the boot is identical in design to the inner half. Let’s move on to the practical part. The boots look, let’s say, budget. Let’s get acquainted with the details. Li-Ning’s shoe size has some problems for me. The fur seemed to have crumpled up and there was room for the fingers. On the fold is a section of thick textured leatherette. At first glance, the materials seem to be a deshman primitive: leatherette outside, fur inside
https://jiji.ng/rivers/shoes
cheburashki.
Let’s go further around the boot. Feeling, the manufacturer did not take the fur into account when choosing the size. But many serious manufacturers, such as Salomon, still use it. Review published in accordance with clause 18 of the Rules And only at the very top there are two pairs of metal eyelets. Let’s now look at the sole. All seams are normal Since traces of glue are visible in places
at the seams.
Hard backs. Only in my opinion, sealing the ends of the threads by repeated stitching in one place looks rude. A band with the designation of branded insulation is sewn on top.
Toe in matte nubuck-like material. I walk silently on the concrete on the street, I don’t stomp, as in Merrell. From below, the laces are threaded simply through the holes. Shoes are made of leatherette. It is medium-hard all the time, which is quite normal for winter.

In terms of wearing comfort, the boots pleasantly surprised me. If it weren’t for problems with my fingers, I would even recommend them for sports.
The hollows show bare EVA foam.
Trekking shoes often have a tongue sewn to the sides of the boots, providing protection from moisture.

Let’s look inside the boot. The only thing is it’s hard to say how long they will last. The base of the sole is quite hard EVA foam (in summer sneakers it is much softer). Moreover, the rest of the foot feels great. I had to hope that the fur would “tread down”. The delivery was sponsored by an intermediary, therefore P.18 is indicated. Well, the observed boots turned out to be of normal length. So, even in shallow snow (10-15 cm) you should not run in boots.

The tongue of the boots is textile, rather high. Sections with hard rubber tread. There is additional reinforcement. As a result, it is difficult to bend the sole of the boot with your hands, but when walking, everything is fine.
Comparing shoes.
By the way, these photos clearly show that the sole is two-component. From above they seem too colorful to me. Compared to Merrell trekking boots, they are very light. Pay attention – the seams are all even and neat. Perhaps warm models are made by a different contractor than usual. Summer / autumn sneakers made of leatherette are a little narrow, they put pressure on the little fingers. Here I am confidently standing on a hill with which the kids ride.
Insole dimensions. Time will tell. I must say right away that at the price of Ali from $50, some negligence in manufacturing is somewhat surprising, although Li-Ning AHTK029 also had this.

The fur is rather neatly trimmed around the edges. But in fact, the legs did not freeze on the street even at minus 22, and at the same time they do not sweat indoors. Above pass through the loops of the braid. The sole in the cold does not tan. However, there are no obvious bugs.

Li-Ning Pioneer winter boots AGCN125

after receiving it, I compared it with my Merrell Polarand Rove boots and realized that these are also boots, just the colors are more colorful. Next is the rubberized area.

Let’s take a look at the insole. And I usually choose the same size as my winter Merrell and Columbia – 12US. As a result, Linings with a textile upper sit right out of the box just wildly comfortable, as if they were made for me personally.

التصنيفات
ads

PETG plastic for 3D printer

I ordered from a warehouse in the Russian Federation, so I received everything quickly enough. Received the spools of Creozone plastic ordered for the promotion.
OEM supplier and manufacturer of plastic I’ve been wanting to make a shadow theater for a long time. It’s just that he didn’t seal it on the glass, but if I smeared it with something, then things went more successfully. Inside there is a bag of silica gel. And if PLA can be taken for a try (And the plastic is not bad, but somewhat more expensive than FDplast), then any exotic type in a large lot with PETG / WOOD / NYLON plastic and so on turns out to be quite profitable. Pen for something.
Creoson PETG Specs:
The photo shows a comparison of nylon and PET packaging Photo of a one-kilogram coil from a PETG lot. Tolerance: ±0.03mm
One of the features of white PETG is translucency. PETG: 230-260℃ (446-500℉)
A couple of tips – it’s better to print with opaque plastic (black PETG is more suitable for this) and use a flashlight without a divergent lens (otherwise the contours of the figures will be fuzzy).

%3Cp%3E%D0%A2%D0%B5%D1%81%D1%82%20%D0%BD%D0%B0%20%D0%BF%D1%80%D0%BE%D1%87%D0 %BD%D0%BE%D1%81%D1%82%D1%8C.%20%3Cbr%20/%3E%D0%94%D0%BB%D1%8F%20%D1%82%D0%BE %D0%B3%D0%BE,%20%D1%87%D1%82%D0%BE%D0%B1%D1%8B%20%D0%BF%D0%BE%D0%B4%D0%B2% D0%B5%D1%81%D0%B8%D1%82%D1%8C%20%D1%82%D1%8E%D0%B1%D0%B8%D0%BD%D0%B3%20(%D0 %BD%D0%B5%20%D1%81%D0%B4%D1%83%D0%B2%D0%B0%D1%82%D1%8C%20%D0%B6%D0%B5%20%D0 %B5%D0%B3%D0%BE%20%D0%BF%D0%BE%D1%81%D0%BB%D0%B5%20%D0%BA%D0%B0%D1%82%D0%B0 %D0%BD%D0%B8%D0%B9),%20%D1%81%D0%B4%D0%B5%D0%BB%D0%B0%D0%BB%20%D0%BA%D1%80 %D1%8E%D1%87%D0%BE%D0%BA%20%D0%BF%D0%BE%D0%B4%20%D0%BF%D0%BB%D0%BE%D1%81%D0 %BA%D1%83%D1%8E%20%D1%80%D1%83%D1%87%D0%BA%D1%83%20%D1%82%D1%8E%D0%B1%D0%B8 %D0%BD%D0%B3%D0%B0,%20%D0%B2%20%D1%80%D0%B0%D0%B7%D0%BC%D0%B5%D1%80.%20%3Cbr %20/%3E%20%3Cbr%20/%3E%D0%9F%D0%B5%D1%87%D0%B0%D1%82%D0%B0%D0%BB%20%D1%81%2060 %%20%D0%B7%D0%B0%D0%BF%D0%BE%D0%BB%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5%D0%BC,%20 %D1%81%D0%BD%D0%B0%D1%87%D0%B0%D0%BB%D0%B0%20%D1%83%D0%B7%D0%BA%D0%B8%D0%B9 %20%D0%BA%D1%80%D1%8E% D1%87%D0%BE%D0%BA,%20%D0%B7%D0%B0%D1%82%D0%B5%D0%BC%20%D1%88%D0%B8%D1%80%D0 %BE%D0%BA%D0%B8%D0%B9%20(%D0%B4%D1%83%D0%BC%D0%B0%D0%BB,%20%D1%81%D0%BB%D0 %BE%D0%BC%D0%B0%D0%B5%D1%82%D1%81%D1%8F%20%E2%80%94%20%D0%BF%D0%BE%D0%BC%D0 %B5%D0%BD%D1%8F%D1%8E).%20%3Cbr%20/%3E%20%3Cbr%20/%3E%D0%A2%D0%B0%D0%BA%20%D0 %B2%D0%BE%D1%82%20%D1%83%D0%B7%D0%BA%D0%B8%D0%B9%20%D0%B4%D0%B5%D1%80%D0%B6 %D0%B8%D1%82%D1%81%D1%8F%20%D0%B1%D0%BE%D0%BB%D1%8C%D1%88%D0%B5%20%D0%BC%D0 %B5%D1%81%D1%8F%D1%86%D0%B0))))%20%3Cbr%20/%3E%20%3Cbr%20/%3E%D0%A2%D1%8E%D0 %B1%D0%B8%D0%BD%D0%B3%20%D0%B2%D0%B8%D1%81%D0%B8%D1%82%20%D0%BF%D1%80%D0%BE %D1%87%D0%BD%D0%BE))))%20%3Cbr%20/%3E%20%3Cbr%20/%3E%D0%95%D1%81%D0%BB%D0%B8 %20%D1%87%D1%82%D0%BE%20%E2%80%94%20%D1%82%D0%B0%D0%BC%20%D1%87%D1%83%D1%82 %D1%8C%20%D0%B1%D0%BE%D0%BB%D0%B5%D0%B5%201.5%20%D0%BA%D0%B3.%20%D0%9D%D0% B0%D0%BF%D0%BE%D0%BC%D0%B8%D0%BD%D0%B0%D1%8E,%20%D0%BA%D1%80%D1%8E%D1%87%D0 %BE%D0%BA%20%D1%88%D0%B8%D1%80%D0%B8%D0%BD%D0%BE%D0%B9%202%20%D1%81%D0%BC,% 2060%%20%D0%B7%D0%B0%D0 %BF%D0%BE%D0%BB%D0%BD%D0%B5%D0%BD%D0%B8%D0%B5.%20%D0%92%D0%B5%D1%81%D1%8C% D0%BC%D0%B0%20%D0%BD%D0%B5%D0%BF%D0%BB%D0%BE%D1%85%D0%BE%D0%B9%20%D1%80%D0% B5%D0%B7%D1%83%D0%BB%D1%8C%D1%82%D0%B0%D1%82.%20%3Cbr%20/%3E%3C/p%3E

A simple vase on a scale for a dollhouse. Diameter: 1.75mm Print temperatures: Greetings to everyone interested in 3D printing and not only.
Technology Features: Zero-bubble
There is also black PET. Since I bought PETG on one of the promotions, and the seller gave an additional good discount on the code word, I indicate item 18. Although you can write something like creozone sss 1.1 and so on.
Under the microscope. An impromptu theater can be made from any large box, A4 paper and a flashlight. Otherwise, do not tear off))))
There is an insert, again with coupons)))
It’s nice that the weight is just over 1 kg. A few print examples. And share my impressions of PETG printing. As far as PETG is concerned, it is now possible to buy stocks at a similar price from other manufacturers, but nylon and other exotic stocks remain profitable to buy. Preheat 70.90°C
A sticker with the type of plastic, weight and packing date.
I would like to draw your attention to the fact https://jiji.com.gh/cars/volkswagen-passat-2009 that successful printing with PET will require not only heating, but also something to increase adhesion (adhesive tape, stickers, etc.). Personal impression: temperature 245°C and table 65°C.
Printed figurines that can be attached to sticks. For comparison, below is a segment after the extruder (pulled out of the Bowden tube, a notch from the gear is visible).
A box-case for something
The enlarged retract removed the extra cobweb from the part. It is necessary to increase the retract. The Creozone store periodically has promotions with a decrease in the price of plastic.
PETG once again proved to be on the good side – the layers are even.

PETG plastic for 3D printer

Pay attention – there is excessive hairiness. I bought as standard – one of the shares. The diameter of the different segments is 1.75 mm.
Suitable for flowers for dolls) If you want to buy this plastic, wait for a reasonable price (currently about $30 for exotic, about $23 for regular PLA/ABS). Moulds- cuttings for dough Somewhat reminiscent of a PLA coil. Other colors can be ordered from a warehouse from China (long enough). Print Speed: 30-60 mm/sec.
Brand sticker
The spool of plastic is packed in a hard vacuum bag. What came of it, you can see under the cut. If you make the layer less than 0.3 mm, then it will be problematic to detach the finished part))) Two segments from the coil – the plastic is smooth without thickening, without bubbles and without foreign inclusions. So far)))) Weight: 1 kg (2.20 lbs) Plastic there with a margin)))) Creozone packaging is standard.
The bottom also turned out even and smooth.
The spool itself is different in shape from the nylon spool. Something like this I ordered in October – in addition to the promotional price, the seller additionally made a few bucks a discount, I got it very well.
I liked the PET — the layers lay down well, with heating the adhesion is excellent. Even without any code words, the seller will make a discount.

There are no drips of plastic, hair, etc. inside. The vase turned out to be nothing
Photograph of the coils in the package. The plastic turned out to be durable, more resistant than PLA. Although of course you need to check with a micrometer along the entire length. Plastic turned out to be cheaper than Russian counterparts, the quality is not bad.
We need to add a screen and light. Place an order and don’t pay. Printed on adhesive sticker, first layer 0.3mm, then standard.

التصنيفات
ads

TOP reviews and discounts – page…

Hand-held vertical vacuum cleaner Redkey W12 for dry and wet cleaning. https://jiji.co.tz/297-electrical-wires Color night vision is implemented due to weak (intelligent;)) backlighting (triggered by movement). It has a power of 150W, battery life up to 50 minutes, a large water tank (520ml).

TOP reviews and discounts – page [25]

Protection against water IP66, temperature from -30 to 60°С. Resolution 2K (2304 x 1296). Work through the Mihome application. On all sites the price is $79.99, in the store at the link under the price we take a coupon for $15. Object tracking function, 350° horizontal rotation and 100° vertical rotation, 110° field of view.

التصنيفات
ads

ACEFAST A13 65W charger

Type-C to Type-C charging cable (100 watts) The charger belongs to the budget segment. The charger is very compact, https://tonaton.ug/s_249-bath-accessories easily fits in the palm of an adult.

ACEFAST A13 65W charger

Instruction -1pc. Delivery is carried out by Russian Post. Packed in a branded box, the box clearly resembles one of the brand manufacturers. The length is 2 meters https://jiji.ng/cell-phones-tablets-accessories/samsung-galaxy-s7-edge, the cable is very thick, it has the manufacturer’s logo and the marking https://tonaton.co.tz/s_251-eyebrows of 100 watts. Charger -1pc.